Grade 304 stainless pallet inverter for sanitary pallet exchange — 180° hydraulic-clamp rotation completes a full exchange in about 60 seconds. FDA-compliant epoxy contact surfaces, electropolished to Ra ≤0.5 µm, 3-A sanitary. Ships across Canada & the US · priced in CAD.
3/4 view
304 SS · 180° · 3-A SANITARY
Incoming product arrives on shipping pallets — wood, recycled, sometimes from outside the facility entirely. None of it belongs inside a controlled space. The conventional fix is to manually restack every load onto a clean in-house pallet: slow, ergonomically punishing, and a contamination risk every time a gloved hand touches product. The pallet inverter removes the problem. It clamps the full load, rotates it 180°, and lets you swap the bottom pallet — a complete transfer from shipping pallet to clean pallet in about 60 seconds, with no manual restacking and no hand contact with the product.
The JL-INV 180 does that to cleanroom standard. The structure is Grade 304 stainless steel. The contact surfaces are finished with an FDA-compliant epoxy and electropolished to a measured roughness of Ra ≤0.5 µm — a sub-micron finish that sheds particles and resists bacterial anchorage through repeated washdown. The whole unit is built to the 3-A sanitary standard for equipment in food, dairy and pharmaceutical processing. A hydraulic clamp holds the load square through the rotation so the exchange is controlled, repeatable, and gentle on the product.
Each unit ships with its operator and maintenance documentation, a sanitary-standard conformity statement, and the factory data sheet confirming the as-built dimensions and load ratings — packed in the crate. Specify your pallet footprint, load profile and throughput at order and we'll confirm the geometry before build.
One configuration. Specs from the factory data sheet shipped with each unit.
| Specification | JL-INV 180 |
|---|---|
| Material | Grade 304 stainless steel |
| Rotation | 180° |
| Clamp | Hydraulic |
| Pallet exchange time | ~60 seconds |
| Contact surfaces | FDA-compliant epoxy |
| Surface finish | Electropolished, Ra ≤0.5 µm |
| Sanitary standard | 3-A sanitary |
| Origin | Built to cleanroom spec · QC'd & shipped from Toronto, Ontario |
We publish only the specs we'll stand behind. Full dimensional and load data — clamp opening range, rated load, platen dimensions, rotation drive ratings and cycle counts — is confirmed on the factory data sheet that ships with the unit and is tuned to your load profile. Specify your pallet footprint, maximum load and throughput at order and we'll confirm the geometry before build. No claims beyond material, rotation, clamp type, exchange time, contact surface, finish and sanitary standard are made on this page.
A cleanroom pallet inverter earns its price when the substrate, the contact surface and the finish all meet sanitary standard — not just the rotation mechanism.
A hydraulic clamp holds the full load square, the frame rotates it a full 180°, and the bottom pallet swaps out. The clean in-house pallet never touches the incoming shipping pallet, and nobody handles the product to make the transfer.
A full pallet exchange takes about 60 seconds — versus the minutes of manual restacking it replaces, with the ergonomic injury risk and contamination exposure that comes with hand-handling every load.
Grade 304 stainless throughout — the standard substrate for sanitary processing equipment. It doesn't shed, corrode or compromise a washdown regime the way painted steel does.
The surfaces that contact the load are finished with an FDA-compliant epoxy — appropriate for direct food and product contact and rated for the cleaning chemistry these environments run.
The electropolish process brings the finish down to a measured roughness of Ra ≤0.5 µm — a sub-micron surface that sheds particles, gives bacteria nothing to anchor to, and survives repeated chemical washdown.
Built to the 3-A sanitary standard for equipment used in food, dairy and pharmaceutical processing — the design and finish criteria your sanitation and quality teams already audit against.
Every JL-INV 180 ships with the documentation a sanitary-processing quality, engineering or maintenance team asks for — packed in the crate with the unit.
304 stainless, FDA-epoxy contact surfaces and a 3-A sanitary build cost what they cost at the factory. The brand's margin and the distributor's quote wall add the rest. We cut both and publish the number.
| Model | Competitor list | Jesterlift | Savings |
|---|---|---|---|
| JL-INV 180 — 304 stainless pallet inverter, 180° | $49,990 | $25,900 | −48% ($24,090) |
Prices in CAD · 304 stainless · 180° hydraulic-clamp rotation · FDA-epoxy contact surfaces · Ra ≤0.5 µm · 3-A sanitary · documentation included · FOB Toronto. Competitor list = published or researched North American brand-catalog price for the equivalent sanitary specification at time of writing.
Same 304 stainless, same FDA-epoxy contact surfaces, same electropolished finish, same 3-A build. We publish the price the rest of the cleanroom industry hides behind a quote — because the only thing that quote wall ever protected was the markup. The court jester says it plainly: the truth is cheaper than the secret.
No portal, no sales gate. Send your pallet footprints, maximum load, throughput and sanitary requirements — we'll come back with a published price, lead time and the documentation contents, usually within one business day.
